Weld Tip Bull Barrel Heavy Duty Cutting Tips
THE Bull Barrel CUTTING TIP SAVES MONEY WHILE INCREASING TIP LIFE;
THE TIPS ARE DESIGNED FOR HEAVY AND ABUSIVE CONDITIONS
Weld Tip Bull Barrel cutting tips are of a completely new design to increase productivity. These unique tips are for cutting situations where tips must endure harsh elements and rough environments. The heavy duty design assures safety, more productive cutting, extremely long tip life and an economy of use. The Bull Barrel cutting tip is utilized in steel mills, scrap yards and rail yards and is ideal for any job where cutting tips receive abusive treatment. Scrappers are available for almost all common torch brands.
1. HEAVY DUTY FLANGE
Scrappers have thicker shell flanges than leading OEM tips. This adds strength and integrity where the shell and internals seal together.
2. SOLID COPPER SHELLS
Bull Barrel are machined from solid copper rather than thin tubing used by the leading OEM's. The Bull Barrel shell is thicker and heavier, designed to last longer under heavy use. Bull Barrel tips will last up to three times longer than the leading OEM tips.
3. EXTRA HEAVY SHELL END
Bull Barrel tips are designed extra heavy and thick at the end of the shell where most tip abuse takes place. The added thickness greatly extends tip life from reflected heat, abrasion, dragging and hammering.
4. LARGER DIAMETER PREHEATS
Bull Barrel tips feature a larger preheat diameter internal than the leading OEM's tips. This decreases preheat time, maintains the cut on painted, scaly, rusty plate and increases cutting speeds.
5. COARSE "V" SPLINES
Scrappers have a coarse "V" spline, which is ideal for cutting rusty, scaly or painted coated plate by hand. The coarse spline does not clog easily and may be cleaned quickly with a pocket knife or wire brush.
Bull Barrel Tips for Harris® Torches
RECOMMENDED TORCH CAPACITY:
The following HARRIS® torches will accept the Bull Barrel Harris® cutting tips, but are limited in capacity according to the following chart:
Maximum Tips Size Used Torch or Torch Series 5 6 8 42-3, 49-F, 49-AF 62-3 98-2, 98-3
Natural Gas/PropanePropylene
MAPP
STYLE SIZE STYLE SIZESTYLE SIZE HN HNF HNB HNX HNFX HNH HNFH HNXH HNFXH HNGB-2 HNGS-2 HNGS-4 HNGS-5 HNR HNRX HN STUB HNRB HN-8 HN-10 HN-14 H-Bull Barrel 5/0-8 5/0-8 00-6 000-6 000-6 5/0-6 5/0-6 000-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 2-6,8,10,12 HP HPX HPH HPXH HPGB-2 HPGS-2 HPGS-4 HPGS-5 HPR HPRX HP STUB HPRB HP-8 HP-10 HP-14 5/0-8 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 HM HMX HMH HMXH HMGB-2 HMGS-2 HMGS-4 HMGS-5 HMR HMRX HM STUB HMRB HM-8 HM-10 HM-14 5/0-8 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6
Bull Barrel Tips for Airco® Torches
The following AIRCO® torches will accept the Bull Barrel Airco®-style cutting tips, but are limited in capacity according to the following chart:
Maximum Tips Size Used Torch or Torch Series 6 9 12 1100, 4700, 4890, 4875, 9000 Series 2600, 300 Series, 9500 Series 4857
Natural Gas/Propane |
Propylene |
MAPP | |||
STYLE |
SIZE |
STYLE |
SIZE |
STYLE | SIZE |
AN ANF ANB ANX ANFX ANCS ANH ANFH ANXH ANFXH ANGB-2 ANGS-2 ANGS-4 ANGS-5 ANR ANRX AN STUB ANRB AN-8 AN-10 AN-14 A-Bull Barrel |
5/0-9 5/0-9 00-6 000-6 000-6 6,8,10,12 5/0-6 5/0-6 000-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 2-6,8,10,12 |
AP APX APH APXH APGB-2 APBS-2 APGS-4 APGS-5 APR APRX AP STUB APRB AP-8 AP10 AP-14 |
5/0-9 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 |
AM AMX AMH AMXH AMGB-2 AMBS-2 AMGS-4 AMGS-5 AMR AMRX AM STUB AMRB AM-8 AM-10 AM-14 |
5/0-9 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 |
Bull Barrel Tips for Victor® Torches
RECOMMENDED TORCH CAPACITY:
The following Victor® torches will accept the Bull Barrel Victor®-style cutting tips, but are limited in capacity according to the following chart:
Maximum Tips Size Used Torch or Torch Series 5 6 7 9 12 CST800, CA1350, FG5A, FGN5A 1400, C1400, CA1050, C1450, CA2050 CAN1050, MT200 SERIES, MTN1200 SERIES ST1000, SST1000, ST1100, ST1200, ST1300 STN2000, STN2300, SSTN2300 MT500 SERIES, MT610NV, MT618NV, MT610AV, MT618AV SST1600 SERIES, SST1700 SERIES, MT610A MT618A, MT610N, MT618N, MTN1500
Natural Gas/Propane |
Propylene |
MAPP | |||
STYLE |
SIZE |
STYLE |
SIZE |
STYLE | SIZE |
VN VNF VNB VNX VNFX VNCS VNH VNFH VNXH VNFXH VNGB-2 VNGS-2 VNGS-4 VNGS-5 VNR VNRX VN STUB VNRB VN-8 VN-10 VN-14 3VN 3VNF 3VNGB-2 3VNGS-2 3VNR V-Bull Barrel 3V-Bull Barrel |
5/0-6 5/0-12 00-6 000-6 000-6 6,8,10,12 5/0-6 5/0-6 000-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 5/0-6 5/0-6 1-6 1-6 2-6,8,10,12 2-6 |
VP VPX VPH VPXH VPGB-2 VPGS-2 VPGS-4 VPGS-5 VPR VPRX VP STUB VPRB VP-8 VP-10 VP-14 3VP 3VPGB-2 3VPGS-2 3VPR |
5/0-12 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 5/0-6 1-6 1-6 |
VM VMX VMH VMXH VMGB-2 VMGS-2 VMGS-4 VMGS-5 VMR VMRX VM STUB VMRB VM-8 VM-10 VM-14 3VM 3VMGB-2 3VMGS-2 3VMR |
5/0-9 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 5/0-6 1-6 1-6 |
Bull Barrel Tips for Oxweld® Torches
RECOMMENDED TORCH CAPACITY:
The following Oxweld® torches will accept the Bull Barrel Oxweld®-style cutting tips, but are limited in capacity according to the following chart:
Natural Gas/PropanePropylene
MAPP
STYLE SIZE STYLE SIZESTYLE SIZE ON ONF ONB ONX ONFX ONCS ONH ONFH ONXH ONFXH ONGB-2 ONGS-2 ONGS-4 ONGS-5 ONR ONRX ON STUB ONRB ON-8 ON-10 ON-14 O-Bull Barrel 5/0-12 5/0-12 00-6 000-6 000-6 6,8,10,12 5/0-6 5/0-6 000-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 2-6,8,10,12 OP OPX OPH OPXH OPGB-2 OPGS-2 OPGS-4 OPGS-5 OPR OPRX OP STUB OPRB OP-8 OP-10 OP-14 5/0-12 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6 OM OMX OMH OMXH OMGB-2 OMGS-2 OMGS-4 OMGS-5 OMR OMRX OM STUB OMRB OM-8 OM-10 OM-14 5/0-12 000-6 5/0-6 000-6 1-6 1-6 20,25 4,5,6 0-3 1-5 1-6 1-6 1-6The above equipment is available for delivery immediately and is F.O.B. Oakville, ON. All taxes extra, all prices listed are in Canadian funds.
Parts for the above equipment can be supplied,and we have the facilities to service and repair the listed equipment.